POOL BLANKETS & ROLLERS


Product Compare (0)


Blanket Rollers - 20M Pools

Blanket Rollers - 20M Pools

ST125 & AT125 Rollers Suitable for blankets 20 m long and up to 6.7 m wide. The “T” frame is made of 316 stainless steel or powder coated aluminium complete with Delrin bearings and stainless steel castors and brakes. The main spindle is manufactured from 125 mm x 2.0 mm clear anodised aluminium tube. To each end of the spindle is fitted a cast aluminium machined axle housings, complete with 25 mm machined stainless steel axles. Stainless steel studs attach the 520 mm anodised white powder coated cast aluminium heavy duty hand wheel is attached. This enables easy single person operation or use with a the Pool Blanket Retriever. Outriggers can be fitted to accommodate wide coping or ..

Blanket Rollers - 25M Pools

Blanket Rollers - 25M Pools

ST152 & AT152 Roller Suitable for blankets 25 m long and up to 6.7 m wide. “T” frame is made of 316 stainless steel or powder coated aluminium complete with Delrin bearings and stainless steel castors and brakes. The main spindle is manufactured from 152 mm x 2.0 mm clear anodised aluminium tube, to each end of the spindle is fitted a cast aluminium machined axle housings, complete with 25 mm machined stainless steel axles. Stainless steel studs attach the 680 mm anodised white powder coated cast aluminium heavy duty hand wheel is attached. This enables easy single person operation or use with a the Pool Blanket Retriever. Outriggers can be fitted to accommodate wide coping or ..

Blanket Rollers - 50M Pools

Blanket Rollers - 50M Pools

SA203 & AT203 Roller Suitable for blankets 50 m long and up to 6.7 m wide. The “A” frame is made of 316 stainless steel or powder coated aluminium complete with Delrin bearings and stainless steel castors with brakes. The main spindle is manufactured from 203 mm x 3.0 mm clear anodised aluminium tube. to each end of the spindle is fitted a cast aluminium machined axle housings, complete with 25 mm machined stainless steel axles. Stainless steel studs attach the 910 mm anodised white powder coated cast aluminium heavy duty hand wheel is attached. This enables easy single person operation or use with a the Pool Blanket Retriever. Outriggers can be fitted to accommodate wide coping or ..

Pool Blankets - Commercial Bubble

Pool Blankets - Commercial Bubble

Bubble covers are made from commercial grade 525 micron PE (Ppolyethylene) translucent blue bubble UltraDome™ material, allowing maximum transmission of warming solar radiation into the pool water while also efficiently insulating against heat escaping. In an outdoor pool, it can warm the water by up to 8ºC. It has an R- value (thermal resistance) of 0.067m2/K, thermal conductivity of 0.080 W/mK and a weight of 460g/m2. It comes complete with full edge binding and end reinforcing, cords, flotation rod, multi point attachment and an attached over cover to protect your investment when on the roller. A floating haul cord is supplied to enable ease of operation. If wind is a ..

Pool Blankets - Commercial Foam/Thermal

Pool Blankets - Commercial Foam/Thermal

The ThermoTech™ foam blanket is made of 3 mm thick, cross-linked PE closed cell Polyolefin foam. This foam consists of 3 layers, is flame-bonded each side to a UV-stabilised, waterproof, non-toxic and chemical resistant blue woven PE material called Canvacon. It has an R-value (thermal resistance) of 0.088 m2/K. It is covered by a 5 year pro-rate warranty. Installations with symmetrical pools can invert the blanket to get an extended life span. The blankets come complete with full edge binding, end reinforcing, and haul cords are installed onto the blanket. Covered by a manufactures 5 year pro-rata warranty. If wind is a problem the blankets can be fitted with wind skirts at additional cost...

Showing 1 to 5 of 5 (1 Pages)