Pool Plus Metal Control
Controls metal staining and scale.
Phosphonic Acid Complex
Prevents staining and discolouration on pool surfaces
Application:
| Product Code | |
| PPMM5001 | Pool Plus Metal Control - 1L 6/ctn |
| PPMM5010 | Pool Plus Metal Control - 10L 1/ctn |
Related Products
Pool Plus 700 Chlorine
For the control of bacteria, viruses and protozoa in swimming pools 700 g/kg available Chlorine present as Calcium HypochloriteAlkaline pH 10 - 12Available in 10KG Suitable for hand dosing and granular feeding systems..
Pool Plus Triple Chlor
Control of algae and bacteria in outdoor swimming pools 810 g/kg available Chlorine present as Trichloroisocyanuric Acid and 100 g/kg Tetraborate Pentahydrate A blend of Stabilsed Granular Chlorine (TCCA) and a water enhancer (Sodium Tetraborate). High Chlorine level, leaving no residue and with built in stabiliser. The regular addition of the Sodium Tetraborate enhances water quality, giving it a soft silky feel. Acidic pH 2 - 3Product must be added via the Skimmer Box with pump running.DO NOT add directly to the pool...
-320x320.png "Pool Plus Buffer Plus")
Pool Plus Buffer Plus
For raising the total alkalinity and pH levels, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppmApplication:Pour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4 hours prior to re-testingApplication rates indicated are to be used as a guide only...
Pool Plus Water Hardener
For increasing calcium hardness in pools and reducing damage to concrete pools. Calcium ChlorideIdeal Calcium Hardness level is between 150 - 500 ppmApplication:100 g will raise the Calcium Hardness by 10 ppm per 10,000 litresProduct should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.Add directly from pool away from the skimmer and filter for a minimum of six hours. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.Application rates indicated are to be used as a guide only...
Pool Plus Algae Remover
Control of algae in swimming pools 400 g/ltr Benzalkonium ChlorideDouble strength ‘quat’ based algaecideIf algae is present use dosage as per 'visible algae growth' If pool is clear us 'monthly dosage' rates to maintain pool DO NOT use when a Hydrogen Peroxide - polyhexamethylne biguanide sanitising system is used. Application:90 ml per 10,000 litres for visible algae growth60 ml per 10,000 litres prevention doseWater may foam immediately after adding but will clear quickly..
Pool Plus Double Impact Algaecide
For the control of algae in swimming pools. 50 g/ltr Copper (Cu) Present as a complex blend of copper salts150 g/ltr Benzalkonium ChlorideDouble Impact Algaecide is formulated using a concentrated blend of organic copper complex and Benzalkonium Chloride, and is designed to combat the most resistant algae strains and is compatible with all recognised sanitisers.Application:..
-320x320.png "Pool Plus Diamond Clear")
Pool Plus Diamond Clear
Fast acting and concentrated coagulant. Gathers the fine particles together and traps them in the filter. Cationic Poly Electrolyte ..