Pool Plus Granular Black Spot
-500x500.png "Pool Plus Granular Black Spot")
Control of blackspot algae in pebblecrete, white plaster and tiled pools.
900 g/kg available Chlorine present as Trichloroisocyanuric Acid (TCCA)
DO NOT use this product in commercial indoor heated pools or commercial spa installations.
Product has high chlorine / low pH. Granules can be directed to specific areas and slow dissolving action of Granular Blackspot will kill and bleach Blackspot and stains.
| Product Code | |
| PPBS5001 | Pool Plus Granular Black Spot - 1kg 12/ctn |
Related Products
Pool Plus 700 Chlorine
For the control of bacteria, viruses and protozoa in swimming pools 700 g/kg available Chlorine present as Calcium HypochloriteAlkaline pH 10 - 12Available in 10KG Suitable for hand dosing and granular feeding systems..
Pool Plus Stabilised Pool Chlorine
For the control of bacteria, viruses and protozoa in swimming pools.630 g/kg available Chlorine present as SodiumdichlorisocyanurateSmall granular size and de-dusted. Fast dissolving leaving no residue it is an ideal product for regular sanitising treatment of swimming pools and also as a supplementary chlorine for salt water pools.Slightly acidic pH 6 - 6.5Application:8 - 20 g per 10,000 litres per day or 25 – 30 g every other dayAdd directly to pool water or pre-dissolve in bucket of water...
Pool Plus Oxidise Plus
Oxidise spas and reduces chloramine in pools 100% Potassium Monopersulphate Ideal for oxidising spas and chloramine reduction in swimming pools.Its unique blend makes it suitable for all Ionised pools giving a long term oxidising effect. Acidic pH 2 - 3Application:Spas: Initial dose 60 g per 2,000 litres then 30 g per 2,000 litres weekly or after spa useIonised Pools: 1 kg per 50,000 litres..
-320x320.png "Pool Plus Buffer Plus")
Pool Plus Buffer Plus
For raising the total alkalinity and pH levels, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppmApplication:Pour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4 hours prior to re-testingApplication rates indicated are to be used as a guide only...
Pool Plus pH Drop
Lowers the pH and total alkalinity levels. Sodium Bisulphate, Dry AcidIdeal pH should be between 7.2 - 7.8.Application:Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
Pool Plus Sun Block
Protects chlorine from ultraviolet sunlight.996 g/kg Cyanuric Acid, StabiliserIdeal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.Application100 g per 10,000 litre will raise Cyanurate level by approx. 10 ppmSun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box (only use 1kg per mix and monitor filter pressure).Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 48 hours to dissolve completely.Application rates indicated are to be used as a guide only...
Pool Plus Water Hardener
For increasing calcium hardness in pools and reducing damage to concrete pools. Calcium ChlorideIdeal Calcium Hardness level is between 150 - 500 ppmApplication:100 g will raise the Calcium Hardness by 10 ppm per 10,000 litresProduct should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.Add directly from pool away from the skimmer and filter for a minimum of six hours. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.Application rates indicated are to be used as a guide only...
Pool Plus Algae Remover
Control of algae in swimming pools 400 g/ltr Benzalkonium ChlorideDouble strength ‘quat’ based algaecideIf algae is present use dosage as per 'visible algae growth' If pool is clear us 'monthly dosage' rates to maintain pool DO NOT use when a Hydrogen Peroxide - polyhexamethylne biguanide sanitising system is used. Application:90 ml per 10,000 litres for visible algae growth60 ml per 10,000 litres prevention doseWater may foam immediately after adding but will clear quickly..
-320x320.png "Pool Plus Liquid Gold")
Pool Plus Liquid Gold
Control of algae in swimming pools Metal Free Concentrated Pool Algaecide685g/L Polymeric Quaternary Ammonium CompoundKills Black spot, Blue-green, Mustard and Green Algae. Can be used in conjunction with all forms of sanitiser. Ideal for Ionised and salt water pools.Application:Application rates indicated are to be used as a guide only...
Pool Plus Double Impact Algaecide
For the control of algae in swimming pools. 50 g/ltr Copper (Cu) Present as a complex blend of copper salts150 g/ltr Benzalkonium ChlorideDouble Impact Algaecide is formulated using a concentrated blend of organic copper complex and Benzalkonium Chloride, and is designed to combat the most resistant algae strains and is compatible with all recognised sanitisers.Application:..
Pool Plus Glitter + Tabs
Pool Plus Glitter + Tabs aid in the coagulation and removal of organic and inorganic wastes that can cause dull and cloudy pool water. Pool Plus Glitter Plus tablets are a unique blend of polymeric clarifiers that instantly dissolve to provide superior water clarity and bather comfort in swimming pools. The tablets are non-toxic, easy to use and safe to store.Each sock contains 5 x 25gram tablets for fast dissolving action.Fast acting clarifier, ideal for newly filled or cloudy pools.Perfect for sand filterspH should be between 7.2 – 7.6 for best results..