Pool Plus Sun Block
Protects chlorine from ultraviolet sunlight.
996 g/kg Cyanuric Acid, Stabiliser
Ideal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.
Application
100 g per 10,000 litre will raise Cyanurate level by approx. 10 ppm
Sun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box (only use 1kg per mix and monitor filter pressure).
Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 48 hours to dissolve completely.
Application rates indicated are to be used as a guide only.
| Product Code | |
| FDS25 | Pool Plus Sun Block Powder - 25kg 1/ctn |
| PPCA4001 | Pool Plus Sun Block - 1kg 12/ctn |
| PPCA4002 | Pool Plus Sun Block - 2kg 8/ctn |
| S25 | Pool Plus Sun Block Granular- 25kg 1/ctn |
| SBT50 | Pool Plus Sun Block Tablets - 25kg 1/ctn - 500G Tablets |
Related Products
Pool Plus 700 Chlorine
For the control of bacteria, viruses and protozoa in swimming pools 700 g/kg available Chlorine present as Calcium HypochloriteAlkaline pH 10 - 12Available in 10KG Suitable for hand dosing and granular feeding systems..
Pool Plus Oxidise Plus
Oxidise spas and reduces chloramine in pools 100% Potassium Monopersulphate Ideal for oxidising spas and chloramine reduction in swimming pools.Its unique blend makes it suitable for all Ionised pools giving a long term oxidising effect. Acidic pH 2 - 3Application:Spas: Initial dose 60 g per 2,000 litres then 30 g per 2,000 litres weekly or after spa useIonised Pools: 1 kg per 50,000 litres..
Pool Plus Buffer Plus
For raising the total alkalinity and pH levels, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppmApplication:Pour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4 hours prior to re-testingApplication rates indicated are to be used as a guide only...
Pool Plus pH Drop
Lowers the pH and total alkalinity levels. Sodium Bisulphate, Dry AcidIdeal pH should be between 7.2 - 7.8.Application:Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
Pool Plus pH Lift
For rapidly increasing pH levels of swimming pools and spas. Soda Ash, Sodium Carbonate (Granules / Powder)Ideal pH should be between 7.2 - 7.8.Application:Application rates indicated are only a guidePour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4-6 hours prior to re-testing..
Pool Plus Granular Black Spot
Control of blackspot algae in pebblecrete, white plaster and tiled pools. 900 g/kg available Chlorine present as Trichloroisocyanuric Acid (TCCA)DO NOT use this product in commercial indoor heated pools or commercial spa installations. Product has high chlorine / low pH. Granules can be directed to specific areas and slow dissolving action of Granular Blackspot will kill and bleach Blackspot and stains...