Blanket Rollers - 50M Pools
SA203 & AT203 Roller
Suitable for blankets 50 m long and up to 6.7 m wide. The “A” frame is made of 316 stainless steel or powder coated aluminium complete with Delrin bearings and stainless steel castors with brakes. The main spindle is manufactured from 203 mm x 3.0 mm clear anodised aluminium tube. to each end of the spindle is fitted a cast aluminium machined axle housings, complete with 25 mm machined stainless steel axles. Stainless steel studs attach the 910 mm anodised white powder coated cast aluminium heavy duty hand wheel is attached. This enables easy single person operation or use with a the Pool Blanket Retriever. Outriggers can be fitted to accommodate wide coping or starting platforms at additional cost. Covered by a manufactures 10 year pro-rata warranty.
| Product Code | |
| DAT203D52 | Aluminium Commercial Roller 5.2m Blankets up to 5m x 50m |
| DAT203D7 | Aluminium Commercial Roller 7m Blankets up to 6.7m x 50m |
| DST203D52 | Stainless Steel Commercial Roller 5.2m Blankets up to 5m x 50m |
| DST203D7 | Stainless Steel Commercial Roller 7m Blankets up to 6.7m x 50m |
Related Products
Pool Blankets - Commercial Bubble
Bubble covers are made from commercial grade 525 micron PE (Ppolyethylene) translucent blue bubble UltraDome™ material, allowing maximum transmission of warming solar radiation into the pool water while also efficiently insulating against heat escaping. In an outdoor pool, it can warm the water by up to 8ºC. It has an R- value (thermal resistance) of 0.067m2/K, thermal conductivity of 0.080 W/mK and a weight of 460g/m2. It comes complete with full edge binding and end reinforcing, cords, flotation rod, multi point attachment and an attached over cover to protect your investment when on the roller. A floating haul cord is supplied to enable ease of operation. If wind is a ..
Pool Blankets - Commercial Foam/Thermal
Made from 4.5mm thick, crosslinked closed cell polyolefin foam. This foam consists of 3 layers; with the foam flame bonded each side to a UV (Ultra Violet) stabilised woven PE (Polyethylene) Canvacon material. Excellent heat retention with Thermal Resistance (R Value) 0.13 m2/Kw.The closed cell foam layer provides excellent insulation and water repellence properties is resistant to chemical degradation, while the outer woven layers gives the pool cover its superior strength and durability.The composite is free of heavy metals, plasticisers and CFCs and has a working temperature range of -40C degrees to +70C degrees.Blankets come complete with full edge binding, end reinforcing, & ha..
Blanket Rollers - 20M Pools
ST125 & AT125 Rollers Suitable for blankets 20 m long and up to 6.7 m wide. The “T” frame is made of 316 stainless steel or powder coated aluminium complete with Delrin bearings and stainless steel castors and brakes. The main spindle is manufactured from 125 mm x 2.0 mm clear anodised aluminium tube. To each end of the spindle is fitted a cast aluminium machined axle housings, complete with 25 mm machined stainless steel axles. Stainless steel studs attach the 520 mm anodised white powder coated cast aluminium heavy duty hand wheel is attached. This enables easy single person operation or use with a the Pool Blanket Retriever. Outriggers can be fitted to accommodate wide coping or ..
Blanket Rollers - 25M Pools
ST152 & AT152 Roller Suitable for blankets 25 m long and up to 6.7 m wide. “T” frame is made of 316 stainless steel or powder coated aluminium complete with Delrin bearings and stainless steel castors and brakes. The main spindle is manufactured from 152 mm x 2.0 mm clear anodised aluminium tube, to each end of the spindle is fitted a cast aluminium machined axle housings, complete with 25 mm machined stainless steel axles. Stainless steel studs attach the 680 mm anodised white powder coated cast aluminium heavy duty hand wheel is attached. This enables easy single person operation or use with a the Pool Blanket Retriever. Outriggers can be fitted to accommodate wide coping or ..