ADJUSTERS & BALANCERS
Aquatic Elements Sulphuric Acid - Low Fume
Decreases pH and Total Alkalinity in swimming pool water. Ideal for use with Granular feeder systems. Sulphuric Acid 35% contains Sulphuric Acid 440 g/ltr. Low fume liquid pool acid. Application:..
Liquid Pool Acid
Decreases pH and Total Alkalinity in swimming pool water 330 g/ltr Hydrochloric (Muriatic) Acid Application: Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
-500x500.png "Pool Plus Buffer Plus")
Pool Plus Buffer Plus
For raising the total alkalinity and pH levels, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppmApplication:Pour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4 hours prior to re-testingApplication rates indicated are to be used as a guide only...
Pool Plus pH Drop
Lowers the pH and total alkalinity levels. Sodium Bisulphate, Dry AcidIdeal pH should be between 7.2 - 7.8.Application:Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
Pool Plus pH Lift
For rapidly increasing pH levels of swimming pools and spas. Soda Ash, Sodium Carbonate (Granules / Powder)Ideal pH should be between 7.2 - 7.8.Application:Application rates indicated are only a guidePour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4-6 hours prior to re-testing..
Pool Plus Sun Block
Protects chlorine from ultraviolet sunlight.996 g/kg Cyanuric Acid, StabiliserIdeal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.Application100 g per 10,000 litre will raise Cyanurate level by approx. 10 ppmSun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box (only use 1kg per mix and monitor filter pressure).Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 48 hours to dissolve completely.Application rates indicated are to be used as a guide only...
Pool Plus Water Hardener
For increasing calcium hardness in pools and reducing damage to concrete pools. Calcium ChlorideIdeal Calcium Hardness level is between 150 - 500 ppmApplication:100 g will raise the Calcium Hardness by 10 ppm per 10,000 litresProduct should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.Add directly from pool away from the skimmer and filter for a minimum of six hours. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.Application rates indicated are to be used as a guide only...