ADJUSTERS & BALANCERS
Aquatic Elements Sulphuric Acid - Low Fume
Decreases pH and Total Alkalinity in swimming pool water. Ideal for use with Granular feeder systems. Sulphuric Acid 35% contains Sulphuric Acid 440 g/ltr. Low fume liquid pool acid. Application:..
IQ Alkalinity Up
Increases the pH of Swimming Pool water Sodium Bicarbonate, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppm Application: 200 g will raise the Total Alkalinity by 10 ppm per 10,000 litres Pour directly into water prior to use or mix in a bucket of water as per the label instructions. Allow pump to run 4 hours prior to re-testing Application rates indicated are to be used as a guide only...
IQ Granu-Cid Liquid Pool Acid
Decreases pH and Total Alkalinity in swimming pool water specifically for use with IQ Granudos feeder systems. Sulphuric Acid 35% contains Sulphuric Acid 440 g/ltr Application: Automatically dosed on demand as required..
IQ Liquid Pool Acid
Decreases pH and Total Alkalinity in swimming pool water 370 g/ltr Hydrochloric (Muriatic) Acid Application: Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
IQ PH Down
Decreases pH and Total Alkalinity in swimming pool water Sodium Bisulphate, Dry Acid No longer classified as a dangerous good for transportation or storage purposes. Ideal pH should be between 7.2 - 7.8. Application: Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
IQ PH Up
Increases the pH of Swimming Pool water rapidly Soda Ash, Sodium Carbonate (Granules / Powder) Ideal pH should be between 7.2 - 7.8.Application: per 10,000 litres: pH Less than 6.8 add 100 g pH 6.8-7.0 add 80 g pH 7.0-7.2 add 40 g Application rates indicated are only a guide Pour directly into water prior to use or mix in a bucket of water as per the label instructions. Allow pump to run 3 hours prior to re-testing..
IQ Sunblock
Protects chlorine from ultra violet sunlight 996 g/kg Cyanuric Acid, Stabiliser Ideal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm. Application 200 g per 10,000 litre will raise Cyanurate level by approx. 20 ppm Sun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box. Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 36 hours to dissolve completely. Application rates indicated are to be used as a guide only...
IQ Sunblock Tabs
Protects chlorine from ultra violet light Each 500 g tablet containing 99.6% Cyanuric Acid Ideal Stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm Application: Apply by placing tablet in skimmer box.500 g per 50,000 litre will raise Cyanurate level by approx 20 ppm Application rates indicated are to be used as a guide only..
IQ Water Hardener
Increases the level of Calcium (Hardness) in swimming pools and spas Calcium Chloride Ideal Calcium Hardness level is between 200 – 500 ppm Application: 100 g will raise the Calcium Hardness by 10 ppm per 10,000 litres Product should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart. Application rates indicated are to be used as a guide only...
-500x500.png "Pool Plus Buffer Plus")
Pool Plus Buffer Plus
For raising the total alkalinity and pH levels, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppmApplication:Pour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4 hours prior to re-testingApplication rates indicated are to be used as a guide only...
Pool Plus pH Drop
Lowers the pH and total alkalinity levels. Sodium Bisulphate, Dry AcidIdeal pH should be between 7.2 - 7.8.Application:Application rate will depend on the pH and Total Alkalinity level Check label or consult your local Pool Professional...
Pool Plus pH Lift
For rapidly increasing pH levels of swimming pools and spas. Soda Ash, Sodium Carbonate (Granules / Powder)Ideal pH should be between 7.2 - 7.8.Application:Application rates indicated are only a guidePour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4-6 hours prior to re-testing..
Pool Plus Sun Block
Protects chlorine from ultraviolet sunlight.996 g/kg Cyanuric Acid, StabiliserIdeal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.Application100 g per 10,000 litre will raise Cyanurate level by approx. 10 ppmSun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box (only use 1kg per mix and monitor filter pressure).Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 48 hours to dissolve completely.Application rates indicated are to be used as a guide only...
Pool Plus Water Hardener
For increasing calcium hardness in pools and reducing damage to concrete pools. Calcium ChlorideIdeal Calcium Hardness level is between 150 - 500 ppmApplication:100 g will raise the Calcium Hardness by 10 ppm per 10,000 litresProduct should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.Add directly from pool away from the skimmer and filter for a minimum of six hours. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.Application rates indicated are to be used as a guide only...