Pool Plus pH Drop
Lowers the pH and total alkalinity levels.
Sodium Bisulphate, Dry Acid
Ideal pH should be between 7.2 - 7.8.
Application:
Application rate will depend on the pH and Total Alkalinity level
Check label or consult your local Pool Professional.
| Product Code | |
| DA25 | Pool Plus pH Drop - 25kg 1/ctn |
| PPDA4003 | Pool Plus pH Drop - 3kg 6/ctn |
Related Products
Aquatic Elements Sulphuric Acid - Low Fume
Decreases pH and Total Alkalinity in swimming pool water. Ideal for use with Granular feeder systems. Sulphuric Acid 35% contains Sulphuric Acid 440 g/ltr. Low fume liquid pool acid. Application:..
Pool Plus Sun Block
Protects chlorine from ultraviolet sunlight.996 g/kg Cyanuric Acid, StabiliserIdeal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.Application100 g per 10,000 litre will raise Cyanurate level by approx. 10 ppmSun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box (only use 1kg per mix and monitor filter pressure).Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 48 hours to dissolve completely.Application rates indicated are to be used as a guide only...
Pool Plus Water Hardener
For increasing calcium hardness in pools and reducing damage to concrete pools. Calcium ChlorideIdeal Calcium Hardness level is between 150 - 500 ppmApplication:100 g will raise the Calcium Hardness by 10 ppm per 10,000 litresProduct should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.Add directly from pool away from the skimmer and filter for a minimum of six hours. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.Application rates indicated are to be used as a guide only...
-320x320.png "Pool Plus Granular Black Spot")
Pool Plus Granular Black Spot
Control of blackspot algae in pebblecrete, white plaster and tiled pools. 900 g/kg available Chlorine present as Trichloroisocyanuric Acid (TCCA)DO NOT use this product in commercial indoor heated pools or commercial spa installations. Product has high chlorine / low pH. Granules can be directed to specific areas and slow dissolving action of Granular Blackspot will kill and bleach Blackspot and stains...
AQUATIC ELELEMENTS Liquid Chlorine
For the control of algae and bacteria in indoor and outdoor swimming pools 130 g/ltr available Chlorine present as Sodium Hypochlorite Suitable for daily chlorination or shock treatment. Very Alkaline pH 12 - 13 Application: 200 ml per 10,000L per day (stabilised pools) 400 ml per 10,000L per day (unstabilised pools) Application rates indicated are to be used as a guide only.Available in 10L, 15L, 20L drums ..
Pool Plus 700 Chlorine
For the control of bacteria, viruses and protozoa in swimming pools 700 g/kg available Chlorine present as Calcium HypochloriteAlkaline pH 10 - 12Available in 10KG Suitable for hand dosing and granular feeding systems..
Pool Plus Pool Tabs
For the control of bacteria, viruses and protozoa in swimming pools and spas.200 g Tablets900 g/kg available Chlorine present as Trichloroisocyanuric AcidAcidic pH 2 - 3Application:1 tablet per 20,000 litres placed in a floating dispenser or semi-automatic dispenser. Replenish as required(slow dissolving and long lasting). Application rates indicated are to be used as a guide only...
Pool Plus Protect & Swim
Crystal clear water with added clarifier. 372 g/kg available Chlorine present as Dichloroisocyanurate and100 g/kg Sodium Tetraborate Pentahydrate also contains non-chlorine oxidiser and flocking agentIts high oxidiser, low chlorine level makes it an ideal instant shock product allowing swimmers to re-enter the water within one hour of application.Acidic pH 4 - 5Application:..
Pool Plus Oxidise Plus
Oxidise spas and reduces chloramine in pools 100% Potassium Monopersulphate Ideal for oxidising spas and chloramine reduction in swimming pools.Its unique blend makes it suitable for all Ionised pools giving a long term oxidising effect. Acidic pH 2 - 3Application:Spas: Initial dose 60 g per 2,000 litres then 30 g per 2,000 litres weekly or after spa useIonised Pools: 1 kg per 50,000 litres..
-320x320.png "Pool Plus Buffer Plus")
Pool Plus Buffer Plus
For raising the total alkalinity and pH levels, Buffer (Powder) Acts as a pH buffer preventing extreme pH shifts Ideal TA level is between 80 – 150 ppmApplication:Pour directly into water prior to use or mix in a bucket of water as per the label instructions.Allow pump to run 4 hours prior to re-testingApplication rates indicated are to be used as a guide only...
Aquatic Elements Sulphuric Acid - Low Fume
Decreases pH and Total Alkalinity in swimming pool water. Ideal for use with Granular feeder systems. Sulphuric Acid 35% contains Sulphuric Acid 440 g/ltr. Low fume liquid pool acid. Application:..
Pool Plus Sun Block
Protects chlorine from ultraviolet sunlight.996 g/kg Cyanuric Acid, StabiliserIdeal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.Application100 g per 10,000 litre will raise Cyanurate level by approx. 10 ppmSun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box (only use 1kg per mix and monitor filter pressure).Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 48 hours to dissolve completely.Application rates indicated are to be used as a guide only...
Pool Plus Water Hardener
For increasing calcium hardness in pools and reducing damage to concrete pools. Calcium ChlorideIdeal Calcium Hardness level is between 150 - 500 ppmApplication:100 g will raise the Calcium Hardness by 10 ppm per 10,000 litresProduct should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.Add directly from pool away from the skimmer and filter for a minimum of six hours. If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.Application rates indicated are to be used as a guide only...
Pool Plus Granular Black Spot
Control of blackspot algae in pebblecrete, white plaster and tiled pools. 900 g/kg available Chlorine present as Trichloroisocyanuric Acid (TCCA)DO NOT use this product in commercial indoor heated pools or commercial spa installations. Product has high chlorine / low pH. Granules can be directed to specific areas and slow dissolving action of Granular Blackspot will kill and bleach Blackspot and stains...
AQUATIC ELELEMENTS Liquid Chlorine
For the control of algae and bacteria in indoor and outdoor swimming pools 130 g/ltr available Chlorine present as Sodium Hypochlorite Suitable for daily chlorination or shock treatment. Very Alkaline pH 12 - 13 Application: 200 ml per 10,000L per day (stabilised pools) 400 ml per 10,000L per day (unstabilised pools) Application rates indicated are to be used as a guide only.Available in 10L, 15L, 20L drums ..
Pool Plus 700 Chlorine
For the control of bacteria, viruses and protozoa in swimming pools 700 g/kg available Chlorine present as Calcium HypochloriteAlkaline pH 10 - 12Available in 10KG Suitable for hand dosing and granular feeding systems..
Pool Plus Pool Tabs
For the control of bacteria, viruses and protozoa in swimming pools and spas.200 g Tablets900 g/kg available Chlorine present as Trichloroisocyanuric AcidAcidic pH 2 - 3Application:1 tablet per 20,000 litres placed in a floating dispenser or semi-automatic dispenser. Replenish as required(slow dissolving and long lasting). Application rates indicated are to be used as a guide only...
Pool Plus Protect & Swim
Crystal clear water with added clarifier. 372 g/kg available Chlorine present as Dichloroisocyanurate and100 g/kg Sodium Tetraborate Pentahydrate also contains non-chlorine oxidiser and flocking agentIts high oxidiser, low chlorine level makes it an ideal instant shock product allowing swimmers to re-enter the water within one hour of application.Acidic pH 4 - 5Application:..