Pal Hi-Lo Portable Aquatic Pool & Spa Lift


The Pal Hi-Lo Aquatic Lift is a portable free standing lift. Easy to move by one person. A lifting capacity of 136 kg with 240 degree rotation. Designed for facilities that have both inground pools and raised spas. The Pal Hi-Lo is a 24v battery powered and operated by a screw driven actuator. It features full mechanised left and right as well as up and down motion. The design and durability of the system ensures consistent operation and minimises service problems.

The Pal Hi-Lo is virtually maintenance free. The components are made from corrosion resistant materials, including powder coated stainless steel and aluminium construction. The unique seat of the lift was specifically designed to provide the user with the greatest possible safety, comfort and ease of transfer.

The hand control is completely waterproof, and allows either the user or the attendant to control its operation with ease. The LiftOperator control box and battery are water resistant and should be protected from long exposure to the water. A small, waterproof cover is included with each lift to cover the LiftOperator control box when the system is in use. If the lift is stored for long periods, an optional cover is available for purchase and is recommended to use to protect the system.

The seating system used is the product of years research. The seat itself is both deeper and higher to both provide a more stable platform for sitting, as well as being able to better accommodate swimmers with reduced trunk stability. The seat has been flattened considerably to eliminate any ridge that would hamper transferring. The sections of the seat have attachment points for both the standard seat belt assembly as well as an optional stability vest.

The standard, moulded plastic footrest is removable and will float upwards to prevent damage if the user lowers the chair too low over the deck.

The included armrests have been strengthened which allows them to be used for support when transferring onto the seat. They can be rotated out of the way during a transfer and can now be added to a seat after the fact, without the need to purchase an entire new seat assembly.

A sling option is also available. The sling can be used instead of the seat by undoing two bolts and removing the arm and seat assembly and replacing it with the Sling Jib. The Sling is then attached to the sling jib. The sling and Jib can be retrofitted to existing Splash, Pal and Pal2 lifts.

What's included:
Pal Hi-Lo Lift, Footrest, Arm Rests, Battery Charger, Battery Cover and Seat Belt Assembly.

Operation:
The client accesses the lift seat then using the left and right buttons on the hand controller rotates the lift over the pool then using the up or down button to raise or lower the seat. The client can then be floated off the seat. Getting out is just as simple.

Installation:
Move lift to where needed. 

Optional Extras:
Sling and Jib Attachment
Use instead of the seat to lift and lower.

Spine Board Attachment
The Spine Board Attachment works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Attachment. One person can easily extract an injured swimmer from a pool.

Cover
Use the cover to protect your investment when not in use.

Seat Pad
White, waterproof seat pad designed to enhance comfort and minimise potential skin damage that could occur during transfer is available as an optional accessory.

Shipping Dimensions:
102 x 122 x 152cm (L x W x H) 542 kg

DOWNLOAD PDFPal Data Sheet
DOWNLOAD PDFPal User Manual
Product Code
PLIF10060 Pal Hi-Lo Aquatic Lift
PLIF10220 Lift Cover
PLIF10230 Sling and Jib Attachment
PLIF10240 Spine Board Attachment

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products