Backstroke Posts should be installed 5 metres from each end of the pool and backstroke flags should be 1.8 metres above the water. The posts slide into post sockets that are core drilled and glued into the concourse / coping.

Fina Rules:

FR 2.9 Backstroke Turn Indicators - Flagged ropes shall be suspended across the pool, 1.8 metres above the water surface, from fixed standards placed 5.0 metres from each end wall. Distinctive marks must be placed on both sides of the pool, and where possible on each lane rope, 15.0 metres from each end wall.

(As at November 2017)

Standard

An eyelet is attached to the post allowing the backstroke flags to tied or clipped to the post. The standard post is the most popular choice. Uses the AQ-PS01 for the 38mm or other diameters available.

WD (Wet Deck)

An eyelet is attached to the post allowing the backstroke flags to tied or clipped to the post. The WD is a little taller to cater for pools with the sockets at water level to ensure the 1.8 metre clearance is maintained. Uses the AQ-PS01 for the 38mm or other diameters available.

Twist Lock

An eyelet is attached to the post allowing the backstroke flags to tied or clipped to the post. When inserting the post you will need to twist the post until it locks into position. The twist lock requires the use AQ-PS01/TL Post Sockets for 38mm or other diameters available.

Brand: AQUEAS

Material: 316 Stainless Steel

Finish: Mirror Polished

Tube Diameters: 38 mmø, 44mmø and 50mmø

Length: 1800mm or 2100mm Other lengths available on request.

If PSP700100 is not in stock allow 4 weeks for delivery. All other non stock products allow 4 weeks for delivery.

Posts and Sockets sold separately.