Increases the pH of Swimming Pool water
Sodium Bicarbonate, Buffer (Powder)
Acts as a pH buffer preventing extreme pH shifts
Ideal TA level is between 80 – 150 ppm
Application:
200 g will raise the Total Alkalinity by 10 ppm per 10,000 litres
Pour directly into water prior to use or mix in a bucket of water as per the label instructions.
Allow pump to run 4 hours prior to re-testing
Application rates indicated are to be used as a guide only...
Decreases pH and Total Alkalinity in swimming pool water specifically for use with IQ Granudos feeder systems.
Sulphuric Acid 35% contains Sulphuric Acid 440 g/ltr
Application:
Automatically dosed on demand as required..
Decreases pH and Total Alkalinity in swimming pool water
370 g/ltr Hydrochloric (Muriatic) Acid
Application:
Application rate will depend on the pH and Total Alkalinity level
Check label or consult your local Pool Professional...
Decreases pH and Total Alkalinity in swimming pool water
Sodium Bisulphate, Dry Acid
No longer classified as a dangerous good for transportation or storage purposes.
Ideal pH should be between 7.2 - 7.8.
Application:
Application rate will depend on the pH and Total Alkalinity level
Check label or consult your local Pool Professional...
Increases the pH of Swimming Pool water rapidly
Soda Ash, Sodium Carbonate (Granules / Powder)
Ideal pH should be between 7.2 - 7.8.Application:
per 10,000 litres:
pH Less than 6.8 add 100 g
pH 6.8-7.0 add 80 g
pH 7.0-7.2 add 40 g
Application rates indicated are only a guide
Pour directly into water prior to use or mix in a bucket of water as per the label instructions.
Allow pump to run 3 hours prior to re-testing..
Protects chlorine from ultra violet sunlight
996 g/kg Cyanuric Acid, Stabiliser
Ideal stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm.
Application
200 g per 10,000 litre will raise Cyanurate level by approx. 20 ppm
Sun Block may be added directly to the pool. Pool may go cloudy for a short period but will clear within 8 hours. Sun Block may be added slowly via the skimmer box.
Do not add to skimmer box if Cyclone pump is fitted. Mix in a bucket of water first and then broadcast over the entire swimming pool. Cyanuric acid may take up to 24 - 36 hours to dissolve completely.
Application rates indicated are to be used as a guide only...
Protects chlorine from ultra violet light
Each 500 g tablet containing 99.6% Cyanuric Acid
Ideal Stabiliser level is 20 – 30 ppm. Do not exceed 50 ppm
Application:
Apply by placing tablet in skimmer box.500 g per 50,000 litre will raise Cyanurate level by approx 20 ppm
Application rates indicated are to be used as a guide only..
Increases the level of Calcium (Hardness) in swimming pools and spas
Calcium Chloride
Ideal Calcium Hardness level is between 200 – 500 ppm
Application:
100 g will raise the Calcium Hardness by 10 ppm per 10,000 litres
Product should be pre-dissolved in a bucket of water adding 2 kg to 5 litres of water.
If more than 6 kg is needed per 50,000 litres of pool water dose separately and apply at least 12 hours apart.
Application rates indicated are to be used as a guide only...